General Specifications:
Total Empty Weight .............................. 9,836 lbs (4,462 kgs)
Wheelbase ................................................... 109" (2,769 mm)
Overall width .......................................................... 92" inches
With one broom option ........................... 103" (2,616 mm)
Turning Circle Diameter .............................. 36' 7" (11.15 mm)
Overall Length ............................................. 215" (5,461 mm)
Overall Height (without beacon) .................... 89" (2,261 mm)

Debris Hopper:
Volumetric Capacity ........................ 3.1 cubic yards (2.75 m3)
Dumping .................................................................. Hydraulic
Material .................................................... Heavy gauge steel
Dump Height .................................................. 67" (1,702 mm)
Dumping Tilt Angle ............................................................ 93o
Inspection Doors .............................................. 1 on each side
Controls ........................................................... Electric; in-cab
Interior Coating ............................................................. Epoxy
Exterior Coating ...................................................Imron® 5000

Blower System:
Type ................................................. WhisperWheelSM turbine
Drive ................................................ Banded 3V-5 groove belt
Speed..................................................................... 3000 RPM
Number of Blades ............................................................... 10
Diameter ................................................................... 30" Dia.
Construction ......................... Welded abrasion-resistant steel
Housing Liner ........................................ Bolt-in corded rubber
Mounting ................................ 2 regreasable sealed bearings
Vacuum Enhancer .............................For heavy/light material
Liner ........................................... Replaceable, corded rubber

Sweeping Head:
Type ..................................... Debris-moving blast and suction
Operating Direction ................................ Forward and reverse
Suspension ........................... 2 trailing arms; spring balanced
Length ............................................................ 92" (2,337 mm)
Blast Hose Diameter ......................................... 10" (254 mm)
Suction Hose Diameter ..................................... 10" (254 mm)
Flap Design ................................. 3 flaps;2 front,1 curved rear
Controls ........................................... Hydraulic raise and lower
Skids ......................................................... Tungsten Carbide

Electrical System:
Starter ........................................................................... 12 volt
Alternator ....................................................... 12 volt, 80 amp
Battery ......................................... 2 @ 12 volt, 750 CCA each
Controls ........................................................................Back lit
Circuit Breakers on Sweeper ........................ Re-settable type
Tachometer ....................................................... Electrical type

Water System:
Tank Capacity ....................................................... 100 gallons
Construction ........................................................ polyethylene
Pump........................................................... Electric 12-volt dc
Controls ........................................................... Electric; in-cab
Filter ............................................................. fine mesh screen
Mounting ................................................................ removable
Fill Diameter .................................................... 3.5" (88.9 mm)

Gutter Broom:
Type ........................................................ Vertical steel digger
Segments .......................................................... 4, disposable,
tempered steel wire filled
Diameter ........................................................ 39" (990.6 mm)
Drive .................................................... Hydraulic torque motor
Speed......................................................................... Variable
Mounting .................................................... trailing arm design
Location ................................................................ behind cab
Suspension .......................................................... free floating
Wear Adjustment .................................................... automatic
Impact Protection .......................................................... spring
Tilt Angle Adjustment ............................................ Turnbuckle
(optional electric in-cab)

Hydraulic System (Dump only):
Type .............................................. 12 Volt DC; self-contained
Fluid Capacity ............................................. 2 gallons (7.57 L)
Purpose ............................................ Power hydraulic without
starting auxiliary engine
Number and Size of Cylinders ............................ 2 @ 4" x 16"
(101.6 mm x 406.4 mm)

Chassis:
A selected truck chassis is provided to give adequate ratings
of all components compatible with hopper capacity. Consult
factory for detailed requirements.

Optional Equipment:
Consult the factory for available options.